Product
BISPLATE500
 is a through hardened, abrasion resistant
steel plate, offering long life expectancy in sliding and gouging
abrasion applications.
Application
BISPLATE 500 is the hardest steel
produced by ISALLOY STEELS and
offers exceptionally long life in sliding
abrasion applications such as:
• Dump Truck Wear Liners
• Chutes
• Wear Liners
• Earthmoving Buckets
• Cutting Edges
• Ground Engaging Tools
Fabrication
BISPLATE 500 is a medium carbon,
high hardness, abrasion resistant steel.
With appropriate attention to heat
input, preheat and consumable
selections, BISPLATE 500 can be
successfully welded to itself and a
range of other steels by conventional
techniques.
Because of its high hardness, cold
forming of BISPLATE 500 is difficult,
requiring higher bending and forming
forces, and greater allowances must
be made for springback.
If heating is necessary, this should not
exceed 200ºC, otherwise mechanical
properties may be affected.
Mechanical Properties
| Properties |
Specification |
Typical |
0,2% Proof Stress |
- |
1400 MPa |
| Tensile Strength |
- |
1640 MPa |
| Elongation in 50mm G.L |
- |
10% |
| Charpy Impact (longitudinal) +20ºC (10mm x 10mm) |
- |
35 J |
| Hardness |
477 - 534 HB |
500 HB |
Chemical Composition
| Thickness |
C |
P |
Mn |
Si |
S |
Ni |
Cr |
Mo |
B |
CE
(IIW)* |
CET* |
| 80 - 100 Maximum |
0.32 |
0.025 |
0.40 |
0.35 |
0.008 |
0.35 |
1.20 |
0.30 |
0.002 |
0.62 |
0.40 |
*Typical Average
Download
 BISPLATE 500 (895 kb)
|
