| |
Products |
| |
|
| |
WEAR
RESISTANT GRADE |
| |
BISPLATE
80 |
| |
BISPLATE 80 is a high strength,
low alloy steel plate with a yield stress three times that of
carbon steel and featuring low carbon, excellent notch toughness,
good weldability and formability. |
 |
| |
Application |
| |
Utilising the high strength properties
of BISPLATE 80 allows reduction in section thickness, without
loss of structural integrity. The following lists some applications
where the strength advantage has been realized : |
| |
• Transport Equipment (Low Loaders)
• High Rise Buildings (Columns)
• Mining Equipment (Dump Truck Trays/Longwall Roof Supports)
• Lifting Equipment (Mobile Cranes/Container Handling
Equipment) • Bridges
• Excavator Buckets
• Storage Tanks
• Induced Draft Fans |
| |
Click here to find
out more about BISPLATE
80 |
| |
|
| |
BISPLATE
400 |
| |
BISPLATE 400 is a
through hardened, abrasion resistant steel plate, offering long
life expectancy in high impact abrasion applications. |
 |
| |
Application |
| |
BISPLATE 400 offers excellent
wear and abrasion resistance and impact toughness in applications
which include : |
| |
• Dump Truck Wear Liners
• Screw Conveyors
• Chutes
• Storage Bins
• Earthmoving Buckets • Cyclones
• Deflector Plates
• Ground Engaging Tools
• Cutting Edges |
| |
Click here to find
out more about BISPLATE
400 |
| |
|
| |
BISPLATE
500 |
| |
BISPLATE 500 is a
through hardened, abrasion resistant steel plate, offering long
life expectancy in sliding and gouging abrasion applications. |
 |
| |
Application |
| |
BISPLATE 500 is the hardest steel
produced by Bisalloy Steels and offers exceptionally long life
in sliding abrasion applications such as: |
| |
• Dump Truck Wear Liners
• Chutes
• Wear Liners • Earthmoving Buckets
• Cutting Edges
• Ground Engaging Tools |
| |
Click here to find
out more about BISPLATE
500 |
| |
|
| |
BISPLATE
450 |
| |
BISPLATE 450 is a
through hardened, abrasion resistant steel plate, with guaranteed
high impact toughness. |
 |
| |
Application |
| |
Long life expectancy in high
impact abrasion application makes BISPLATE 450 the ideal choice
for a variety of applications, including: |
| |
• Dump Truck Bodies &
Dump Truck Wear Liners
• Mining Buckets
• Tipper Bodies
• Cutting Edges
• Construction Waste Bins
•Liner Plates / Chutes |
| |
Click here to find
out more about BISPLATE
450 |
| |
|
| |
STRUCTURAL
STEEL |
| |
High
Strength Structural Steel Plate |
| |
AS3678 GR350 / A572 GR50 / SM490
plate is a high strength structural steel product with
nominal yield strength of 350 MPa. |
 |
| |
Application |
| |
• General fabrication
• Structural
• High rise buildings
• Bridges
• Welded Construction
• Bolted Construction
• Riveted Construction
• Sheet piling
• Storage tanks |
| |
Click here to find
out more about AS3678
Gr350 /
A572 Gr50
/ SM490 |
| |
|
| |
SPECIALTY
METALS |
| |
BISCLAD
600 |
| |
BISCLAD 600 is a chromium
carbide clad mild steel plate offering outstanding wear life
for areas subject to sliding abrasion wear. |
 |
| |
Application |
| |
• Wear plates for draglines
• Shovels
• Hoppers
• Skid Plates • Chutes
•
Deflector
• Slurry pipes
• Dust pipes |
| |
Click here to find
out more about BISCLAD
600 |
| |
|
| |
HICLAD |
| |
HICLAD is a welded chromium
carbide overlay on a mild steel backing plate. The unique manufacturing
process provides many advantages over competitive products such
as a very flat and smooth surface, moderate impact resistance
and formability |
 |
| |
Application |
| |
• Separator Blade
• Shell Liner
•
Side Wall of Duct
• Feeding Chutes • Dust Pipes
• Impact Sliding Liner |
| |
Click here to find
out more about HICLAD
|
| |
|
| |
BISDOMITE
700 |
| |
BISDOMITE 700 is a combination
of high chromium white iron, metallurgically bonded to a mild
steel backing plate, designed to protect your equipment from
impact and high abrasion wear, resulting in reduced equipment
downtime, extended wear life and greater cost effectiveness
than conventional wear materials. |
 |
| |
Application |
| |
• Dragline bucket protection
• Shovel bucket
protection
• Excavator protection
• Conveyor
chute liners/transfer points • Feeder deck plates
• Grizzly screens
• Cheek plates |
| |
Click here to find
out more about BISDOMITE
700 |
| |
|
| |
3CR12 |
| |
3CR12 is a weldable Chromium-containing
utility stainless steel, with a fine-grained duplex ferritic-martensitic
microstructure. |
 |
| |
Application |
| |
3CR12 is particularly recommended for
use on moderately aggressive environments found in the construction,
industrial, marine, mining and mineral processing fields. It
provides a cost-effective solution to corrosion, oxidation and
corrosion/abrasion problems in a wide range of environments.
Typical examples include: |
| |
• Ore Cars
• Pipe and tube for slurry handling
• Coal chutes and liners
• Pipe and tube
for slurry handling • Feeder deck plates
• Storage
bins and hoppers
• Locomotive bodies
• Agricultural
Silos
• Ash Handling
• Masonry fixings
• Coal wash plant structure
• Conveyor decking
• Sand - chutes dredging
• Screw Conveyors |
| |
Click here to find
out more about 3CR12
|
| |
|
| |
BIS
310S |
| |
BIS 310S is a stainless steel
plate which is designed for moderately high temperature applications.
The steel also has good ductility, toughness and weldability. |
 |
| |
Application |
| |
BIS 310S is used when the application
environment involves moist corrodents in a temperature range
lower than that which is normally considered "high temperature"
service. BIS 310S has excellent corrosion resistance at normal
temperatures, and exhibits good resistance to oxidizing and
carburizing atmosphere at moderately high temperature service.
Typical applications are : |
| |
• Furnace parts
• Oil burner parts
•
Carburising boxes • Heat treatment baskets and jigs
• Heat exchangers
• Welding filler wire and
electrodes |
| |
Click here to find
out more about BIS310
s |
| |
|
| |
A516
GR70(N) |
| |
A516 GR70 plate is a pressure
vessel carbon steel plate for moderate and lower temperature
service in American Society for testing and material (ASTM)
specification with nearest overseas equivalent to JIS G3118-SGV480,
BS1501 GR490, DIN 17155-H11, AS1548-7-490 |
 |
| |
Application |
| |
• Pressure Vessel
• Boiler |
| |
Click here to find
out more about A516
GR70(N) |
| |
|
| |
ROUND
BAR 4140 |
| |
A medium carbon, chromium-molybdenum
steel with medium to high hardenability and high tensile strength. |
 |
| |
Application |
| |
Applications include general engineering
purposes such as pins, shafts, connecting rods, gears, hold
down bolts and other fastener or connection components. Most
fastener applications require product to have suitable surface
preparation and heat treatment. |
| |
Click here to find
out more about ROUND BAR 4140
|
| |
|
